manager@kiaev6.org (915) 212-77133

Kia EV6: Repair procedures

Replacement of components after deploying the SRS

Kia EV6. Repair procedures   

• Before starting the work related to the airbag, Check the Diagnosis Trouble Code (DTC) by using the KDS, and perform the related work by using the DTC list.

• Be sure to keep the torque specifications presented in shop manuals. Otherwise, it could lead to the malfunction of airbag system.

1.When the front airbag deployed after collision, replace the following components.

1)SRS Control Module (SRSCM)

2)Deployed airbag

3)Ignited seat Belt Pretensioner (BPT)

4)Front Impact Sensor

5)SRS wiring harness

6)Replace the clock spring if there is any problem after checking the clock spring for damage when the Driver Airbag (DAB) module is deployed.

2.When the Side Airbag (SAB) / Curtain Airbag (CAB) module is deployed after a crash, replace the following components.

1)SRS Control Module (SRSCM)

2)Deployed airbag

3)Side impact sensor on the deployed side

4)SRS wiring harness

5)Ignited seat Belt Pretensioner (BPT)

3.After repairing the vehicle, check if the SRS operates normally.

1)Turn IG ON. The airbag warning lamp should turns off after turning on for 3 - 6 seconds.

    Previous pageDescription and Operation

    Description The airbag system is a Supplemental Restraint System (SRS) to protect the driver and passengers from injuries by operating the airbags and seat Belt Pretensioners (BPT) installed on ...

    PREV

    Next pageSRSCM

    ...

    NEXT
    Other information:

    Kia EV6 (CV) 2022– Workshop Manual: Precautions for accident vehicle
    Precautions for accident vehicle     The Electric Vehicle comes equipped with a high voltage battery that can cause serious injury, like electric shocks, or even death when malfunctioning or mishandled, so follow manual below. Preparations when servicing the accident vehicle ...

    Kia EV6 (CV) 2022– Workshop Manual: Lubricant
    Lubricant Item Recommended Capacity Brake fluid (cc) DOT 4 As required (500 ± 20 cc) *Refer to 'MAX - MIN" line on the reservoir tank Brake pedal bushing and brake pedal bolt Chassis grease (GREASE PDLV-1) ...