manager@kiaev6.org (915) 212-77133

Kia EV6: Single-Use Parts

Single-Use Parts

Non-reusable parts (Single-Use Parts)

Workshop manual provides “Components and Components Location” which can be used to identify “Non-reusable parts”. When repairing a vehicle, Non-reusable parts such as fasteners, gaskets, washers, clips and garnishes must be replaced. Kia Non-reusable parts are designed to be installed only once. Before working on a vehicle, check “Components and Components Location” to find the non-reusable parts in a system.

※ Symbol of Non-reusable parts

Symbol Meaning

Kia EV6. Single-Use Parts

Do not reuse the part. Replace with a new one.

※ Example of “Components and Components Location”

Kia EV6. Single-Use Parts

    Other information:

    Kia EV6 (CV) 2022– Workshop Manual: Removal and Installation - 4WD
    Removal Coolant Inlet Temperature Sensor 1.Disconnect the battery negative ( - ) terminal and the service interlock connector.(Refer to Battery Control System - "Auxiliary 12 V Battery") 2.Remove the front trunk.(Refer to Body - "Front Trunk") 3.Disconnect the coolant inle ...

    Kia EV6 (CV) 2022– Workshop Manual: Side Sill Molding
    Removal 1.Open the front door and rear door. 2.Removing the side sill molding (A) after removing the screw.     Clip position : Installation 1.Install in the reverse order of removal. ...