manager@kiaev6.org (915) 212-77133

Kia EV6: Troubleshooting

Troubleshooting

Excessive play in steering

Suspected Cause Correction
Universal joint bolt got loose Retighten or replace if necessary
Yoke plug got loose Retighten
Steering gear box bolt got loose Retighten
Tie rod end stud got loose or worn Retighten or replace if necessary

Steering wheel does not return to its original position

Suspected Cause Correction
Excessive turning resistance of tie rod end Replacement
Yoke plug excessively tight Adjustment
Faulty tie rod or ball joint Replacement
Steering gear box and front sub frame got loose Retighten
Steering column shaft or body grommet got worn Repair or replace
Bended rack Replacement

Rattling or chucking noise in the rack and pinion

Suspected Cause Correction
Steering gear mounting bolts got loose Retighten
Tie rod end ball joint got loose Retighten
Tie rod or tie rod end ball joint got worn Replacement
Yoke plug got loose Retighten

    Previous pageSpecial Service Tool

    Special Service Tool Tool Name / Number Illustration Description Ball joint puller 09568 - 2J100 Used for removal of tie rod end ...

    PREV

    Next pageInspection

    Inspection Steering Wheel Play Inspection 1.Align the steering wheel straight. 2.Mark the steering wheel center (A) using masking tape or etc. 3.Turn the steering wheel until the wheel is mov ...

    NEXT
    Other information:

    Kia EV6 (CV) 2022– Workshop Manual: Console Armrest
    Removal 1.Remove the rear console cover.(Refer to Floor Console - "Rear Console Cover") 2.Remove the console armrest (A) after removing the screws. Installation 1.Install in the reverse order of removal. ...

    Kia EV6 (CV) 2022– Workshop Manual: Single-Use Parts
    Single-Use Parts Non-reusable parts (Single-Use Parts) Workshop manual provides “Components and Components Location” which can be used to identify “Non-reusable parts”. When repairing a vehicle, Non-reusable parts such as fasteners, gaskets, washers, clips and garnishes must be repla ...