manager@kiaev6.org (915) 212-77133

Kia EV6: Inspection

Inspection

1.Apply battery voltage to terminal 1 (ground) and terminal 2 (battery+) and verify that it operates.

2.Check the fuse and relay.

    Previous pageRemoval and Installation

    Removal     • When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high ...

    PREV
    Other information:

    Kia EV6 (CV) 2022– Workshop Manual: Single-Use Parts
    Single-Use Parts Non-reusable parts (Single-Use Parts) Workshop manual provides “Components and Components Location” which can be used to identify “Non-reusable parts”. When repairing a vehicle, Non-reusable parts such as fasteners, gaskets, washers, clips and garnishes must be repla ...

    Kia EV6 (CV) 2022– Workshop Manual: Rear Cross Member
    Removal 1.Remove the height sensor. [If equipped](Refer to Body Electric System - "Intelligent Front-lighting System (IFS)") 2.Remove the rear motor and reduction gear assembly.(Refer to Motor and Reduction Gear System - "Rear Motor and Reduction Gear Assembly") 3.Remove ...