manager@kiaev6.org (915) 212-77133

Kia EV6: Low Voltage DC/DC Converter (LDC)

Description

• The power (DC) of a high voltage battery converts the power of low battery (DC). (high voltage → low voltage)

• LDC and OBC are integrated in the Integrated Charge Control Unit (ICCU).

Kia EV6. Low Voltage DC/DC Converter (LDC)

Troubleshooting

How to remedy when the fault code occurs

Item Major Fault Code Suspected Cause Inspection
LDC inspection • Output overvoltage fault • LDC • Replace the Integrated Charge Control Unit (ICCU) when the same problem occurs after the vehicle restarts
• LDC Voltage Control fault
• Sensors fault
- Current sensor offset calibration abnormality
- Temperature sensor open circuit/short circuit/performance abnormality fault
- Input / Output voltage sensor fault
• PWM output fault
Vehicle inspection • Output terminal path fault • Wiring and connectors between the LDC output terminal and the high voltage junction box • Check the LDC output circuit and cable connection condition
Coolant system fault • Coolant system
• Low coolant
• Electric Water Pump (EWP)
• Inspect the Electric Water Pump (EWP)
• Input over current fault • Auxiliary 12 V Battery discharged
• 12 V electric component overload
• Check the auxiliary 12 V battery discharge condition
• Check abnormal operation or short circuit conditions of 12 V electric components

Replacement

Kia EV6. Low Voltage DC/DC Converter (LDC)   

• When working on high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or electric leakage.

• When working on high voltage system or related components, make sure that you are familiar and comply with the "Safety Precautions, Cautions and Warnings." If you do not comply with the instructions, serious accidents due to electric shock or leakage may occur.

• When working on high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedures.

Kia EV6. Low Voltage DC/DC Converter (LDC)   

The LDC cannot be replaced individually due to included in the Integrated Charging Control Unit (ICCU). If necessary, replace the ICCU.

1.Replace the Integrated Charge Control Unit (ICCU).(Refer to High Voltage Charging System - "Integrated Charger and Converter Unit (ICCU)")

    Previous pageInverter Assembly (4WD)

    Specification Item Specification Input voltage (V) 452.5 - 778.3 Operating voltage (V) 9 - 16 Continuous current (A) 7 ...

    PREV

    Next pageAuxiliary Battery (12 V)

    Specification Item Specification Type CMF60L-DIN Capacity [20HR/5HR] (AH) 60 / 48 Cold cranking amperage (A) 550 (SAE ...

    NEXT
    Other information:

    Kia EV6 (CV) 2022– Workshop Manual: Disconnect Actuator System (DAS) Motor
    Components and Components Location 1. Disconnect Actuator System (DAS) Motor 1-a. 4.9 - 5.9 N·m (0.5 - 0.6 kgf·m, 3.6 - 4.3 lb·ft, 43.4 - 52.1 lb·in) 2. O-ring Description The 4WD system improves driving performance but also reduce driving range.To compensate for shortening r ...

    Kia EV6 (CV) 2022– Workshop Manual: Precautions for accident vehicle
    Precautions for accident vehicle     The Electric Vehicle comes equipped with a high voltage battery that can cause serious injury, like electric shocks, or even death when malfunctioning or mishandled, so follow manual below. Preparations when servicing the accident vehicle ...