manager@kiaev6.org (915) 212-77133

Kia EV6: Motor and Reduction Gear Oil Cooler

Previous pageRemoval and Installation

Removal Active Air Flap(AAF) 1.Disconnect the battery negative ( - ) terminal and the service interlock connector.(Refer to Battery Control System - "Auxiliary 12 V Battery - 2WD")(Refe ...

PREV

Next pageComponents and Components Location

Component Location Front Motor 1. Motor and Reduction Gear Oil Cooler Coolant Hose 2. Motor and Reduction Gear Oil Cooler Coolant Hose 3. Motor and Reduction Gear Oil Cooler Oil Hose 4. Mo ...

NEXT
Other information:

Kia EV6 (CV) 2022– Workshop Manual: Rear Cross Member
Removal 1.Remove the height sensor. [If equipped](Refer to Body Electric System - "Intelligent Front-lighting System (IFS)") 2.Remove the rear motor and reduction gear assembly.(Refer to Motor and Reduction Gear System - "Rear Motor and Reduction Gear Assembly") 3.Remove ...

Kia EV6 (CV) 2022– Workshop Manual: Evaporator Temperature Sensor
Description It is mounted on the evaporator to prevent freezing by sensing the temperature of the evaporator core. A NTC thermistor is installed inside the sensor, so when the temperature decreases, the resistance value increases, and when the temperature increases, the resistance value decr ...