Kia EV6 (CV) 2022–2025 Workshop Manual

Cooling System / Coolant Temperature Sensor / Specification /

Kia EV6: Specification

Specification

Item	Specification
Operating condition (°C [°F])	-40 to 140 (-40 to 221)

Coolant Temperature Table

Temperature [°C (°F)]	Resistance (kΩ)
-20 (-4)	14.13 - 16.83
-10 (14)	8.39 - 10.22
0 (32)	5.28 - 6.30
10 (50)	3.42 - 4.01
20 (68)	2.31 - 2.59
30 (86)	1.55 - 1.76
40 (104)	1.08 - 1.21
50 (122)	0.77 - 0.85
60 (140)	0.55 - 0.61
70 (158)	0.42 - 0.45
80 (176)	0.31 - 0.33
90 (194)	0.24 - 0.25
100 (212)	0.18 - 0.19
110 (230)	0.15 - 0.15
120 (248)	0.11 - 0.12

Coolant Temperature Sensor

...

PREV

Removal and Installation - 2WD

Removal Coolant Inlet Temperature Sensor 1.Disconnect the battery negative ( - ) terminal and the service interlock connector.(Refer to Battery Control System - "Auxiliary 12 V Battery" ...

NEXT

Other information:

Kia EV6 (CV) 2022– Workshop Manual: Wheel Balance
Inspection Wheel balance needs to be adjusted if the tires are unbalanced or after tire replacement or maintenance work has been performed.Maximum rim unbalance weight : 2.12 oz (60 g) • If the maximum unbalance weight over than 3.53 oz (100g), reassemble the wheel ...

Kia EV6 (CV) 2022– Workshop Manual: Charge Door Module (CDM)
Removal 1.Remove the right outside rear combination lamp.(Refer to Body Electrical System - "Rear Combination Lamp") 2.Remove the flange cover (A). 3.Disconnect the charge door control unit connector (A). 4.Remove the stop / tail lamp (A) after removing the screws. 5.R ...

KIAEV6.ORG