Troubleshooting
Water leaks
|
Components |
Suspected Cause |
Correction |
|
Moving glass |
Defect of gap/flush |
Adjustment |
|
Weatherstrip |
Incorrect installation and deformation |
Replacement |
Wind noise
|
Components |
Suspected Cause |
Correction |
|
Deflector |
Deformation and separation |
Replace or reinstall |
|
Moving glass |
Defect of gap/flush |
Adjust of gap/flush |
Drive noise
|
Components |
Suspected Cause |
Correction |
|
Weatherstrip |
Rubbing noise |
Apply the silicone oil |
|
Hardware |
Loose or unfastened |
Hardware re-tighten |
|
Cover / Trims |
Interference noise (rattle/rubbing) |
Attach the pad to the noise generating area. |
Operation noise
|
Components |
Suspected Cause |
Correction |
|
Mechanism rail |
Foreign matters in the mechanism rail |
Cleaning the rail and apply the grease |
|
Motor |
Defective coupling of mechanism cable and motor pinion gear |
Adjust or replace motor position |
|
Motor pinion gear worn out or breakage |
Replacement |
|
Roller blind |
Noise inside the spring |
Replacement |
Malfunctions
|
Components |
Suspected Cause |
Correction |
|
Mechanism rail |
Increased operating load due to accumulation of foreign matters |
1. Cleaning the rail and apply the grease
2. Adjust or replace motor position
3. Replacement of mechanism rail |
|
Motor |
Defective coupling of mechanism cable and motor pinion gear |
Adjust or replace motor position |
|
Motor position loss and sunroof switch one-touch operation failure due to
discharge and replacement of battery and fuse |
Motor initialization |
|
Roller blind |
Separation of the teflon guide |
Replace or reinstall |
|
Release of the spring tension |
Replacement |
Damage
|
Components |
Suspected Cause |
Correction |
|
Front glass |
Damage due to external impact |
Replacement |
|
Moving glass |
Replacement |
Component
1. Front Glass
2. Front Glass Weatherstrip
3. Moving Glass
4. Sunroof Deflector
5. Sunroof Mechanism
6. Sunroof Drive Unit
7. Sunroof Roller Blind
8. Moving Glass Motor
8-a. ...
PREV
Adjustment
1.Inspect the gap and flush between the front glass (A) and the moving glass
(B), and adjust if necessary.
[Front glass - Moving glass]
Item
Gap [mm (in. ...
NEXT
