manager@kiaev6.org (915) 212-77133

Kia EV6: Heater

Previous pageChiller

Description It is a heat pump system that exchanges low-temperature refrigerant by using waste heat from the high voltage battery. Removal     • When working on high voltage ...

PREV

Next pageComponents and Components Location

Component 1. Driver Side Shower Duct 2. Driver Side Mode Control Actuator 3. Driver Side Temperature Control Actuator 4. Rear Heating Temperature Control actuator 5. Rear Cooling Temperat ...

NEXT
Other information:

Kia EV6 (CV) 2022– Workshop Manual: Removal and Installation - 4WD
Removal     • When working on high voltage system, the work should be performed by technicians who have completed the relevant training. It is because that lack of knowledge of the high voltage system can lead to serious accidents due to electric shock or electric leakage. ...

Kia EV6 (CV) 2022– Workshop Manual: Front Under Cover
Removal Front Under Cover 1.Remove the front under cover (A) after removing the fasteners and bolts. Tightening torque :7.8 - 11.8 N·m (0.8 - 1.2 kgf·m, 5.8 - 8.7 lb·ft) Front Rear Under Cover     When installing the lift jack, verify that the lift jack (A) and the fro ...